subject
Engineering, 17.06.2021 23:50 supasavb99

Air enters a 30 mm diameter pipe with a velocity of 153 m/s and a temperature of 300 K. If the average friction factor is f= 0.040, determine the length of pipe needed so that sonic flow occurs at the exit. Also, what is the velocity of the air in the pipe at the exit and at L = 0.8 m?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160Β°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
You know the right answer?
Air enters a 30 mm diameter pipe with a velocity of 153 m/s and a temperature of 300 K. If the avera...
Questions
question
Computers and Technology, 01.07.2019 22:00
question
Mathematics, 01.07.2019 22:00
question
Mathematics, 01.07.2019 22:00
Questions on the website: 13722361