Engineering, 24.06.2021 04:30 alexis3744
Bộ truyền đai thông, có đường kính bánh đai chủ động và bị động 200 và 600 mm. Khoảng cách trục là 540mm. Xác định chiều dài dây sao cho khoảng cách trục sai lệch ít nhất và tỉ số truyền của bộ truyền với hệ số trượt e= 0,032. Chiều dài tiêu chuẩn của dây đai 1000, 1120, 1125, 1400, 1600, 1800, 2000, 2240, 2500, 2800, 3150 mm
Answers: 3
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
Bộ truyền đai thông, có đường kính bánh đai chủ động và bị động 200 và 600 mm. Khoảng cách trục là 5...
Mathematics, 25.11.2020 04:50
Mathematics, 25.11.2020 04:50
Health, 25.11.2020 04:50
Mathematics, 25.11.2020 04:50
History, 25.11.2020 04:50
Mathematics, 25.11.2020 04:50
Mathematics, 25.11.2020 04:50
Mathematics, 25.11.2020 04:50
Mathematics, 25.11.2020 04:50
English, 25.11.2020 04:50
Biology, 25.11.2020 04:50
Arts, 25.11.2020 04:50