Engineering, 24.06.2021 17:10 asdfghj3513
Bộ truyền đai thông, có đường kính bánh đai chủ động và bị động 200 và 600 mm. Khoảng cách trục là 540mm. Xác định chiều dài dây sao cho khoảng cách trục sai lệch ít nhất và tỉ số truyền của bộ truyền với hệ số trượt e= 0,032. Chiều dài tiêu chuẩn của dây đai 1000, 1120, 1125, 1400, 1600, 1800, 2000, 2240, 2500, 2800, 3150 mm
Answers: 1
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
Engineering, 04.07.2019 19:10
Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.
Answers: 1
Engineering, 04.07.2019 19:20
Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.
Answers: 2
Bộ truyền đai thông, có đường kính bánh đai chủ động và bị động 200 và 600 mm. Khoảng cách trục là 5...
Law, 20.02.2020 08:52
Mathematics, 20.02.2020 08:52
Computers and Technology, 20.02.2020 08:52
Computers and Technology, 20.02.2020 08:53
Social Studies, 20.02.2020 08:53
Computers and Technology, 20.02.2020 08:53
Mathematics, 20.02.2020 08:53