Engineering, 28.06.2021 02:40 hopkinsgail569

The Golden Gate Bridge is a magnificent structure that connects the San Francisco peninsula in the north with southern Marin County, near Sausalito. Crossing the bridge costs approximately USD $8. The roadway or roadway is on a reinforced structure 3 meters high, and is suspended by two huge main cables attached to the towers, which reach a height of 230 m above sea level, the cables take the form of a parabola and touch the roadway in the center of the bridge. There are 70 m between the roadway and sea level. Its dimensions are shown in the figure below. What is the length of the cables attached to the towers, which support the bridge structure for 1280 m, and which also touch the roadway at the center of the bridge?

Calculate analytically (20 pts)

The Golden Gate Bridge is a magnificent structure that connects the San Francisco peninsula in the

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

The Golden Gate Bridge is a magnificent structure that connects the San Francisco peninsula in the n...

Questions