subject
Engineering, 30.06.2021 18:40 jakeisadog698

100 kg of - is to be cooled from 10 degrees * C to - 20 degrees * C . The diameter of the Spherical liver equals 7cm. Assume that the density of the liver is equal to 1000 kg/m3 , heat transfer coefficient and convection equals to 50 W/m2 . K. (the air temperature equals -30 C.) A. chose one only 1- Using the specific heat, determine the amount of heat that must be removed from the lamb. 2- How much actual heat must be removed during this process? B. Estimate the time required for freezing. l ā€‹

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200Ā°c and outer surface temperature of the insulation to be 15Ā°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12Ā°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200Ā°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
100 kg of - is to be cooled from 10 degrees * C to - 20 degrees * C . The diameter of the Spherical...
Questions
question
Social Studies, 16.11.2020 19:50
question
Mathematics, 16.11.2020 19:50
question
Mathematics, 16.11.2020 19:50
Questions on the website: 13722363