Engineering, 01.07.2021 15:40 yialefi
An insulated piston-cylinder device initially contains 300 L of air at 120 kPa and 300 K. The air is heated for 15 minutes by a 200 Watt resistance heater inside the cylinder. The air pressure is kept constant during the heating process. Find the entropy change of the air (kJ/oK) using a) the air tables and b) an appropriate constant value of specific heat.
Answers: 3
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
An insulated piston-cylinder device initially contains 300 L of air at 120 kPa and 300 K. The air is...
Chemistry, 28.02.2020 22:26
Biology, 28.02.2020 22:26
Chemistry, 28.02.2020 22:26
Mathematics, 28.02.2020 22:26