Engineering, 02.07.2021 01:00 ReaganS4
2 strain gauges with a nominal resistance of 120 ohms (each)and a gauge factor of 2.10 are used in a half bridge (resistances R1 and R3 in fig. 8.5 in the text), with other unstrained resistors being 120 ohms. Supply voltage is 5 V. Calculate the micro strain if the output voltage is 20 mV.
Answers: 3
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15Β°c, and the outlet water temperature is 50Β°c. the tube wall temperature is 14Β°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Engineering, 04.07.2019 18:20
Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)
Answers: 2
Engineering, 04.07.2019 19:10
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
2 strain gauges with a nominal resistance of 120 ohms (each)and a gauge factor of 2.10 are used in a...
History, 18.09.2019 05:30
History, 18.09.2019 05:30
Mathematics, 18.09.2019 05:30
Chemistry, 18.09.2019 05:30
Health, 18.09.2019 05:30
History, 18.09.2019 05:30
History, 18.09.2019 05:30