Engineering, 08.07.2021 20:40 ebookhardt917

Create two tapes with opposite charge The previous exercises have shown you how to create a charged tape and how to neutralize it. You should have seen that two A-tapes repel each other, indicating that they are of like charge. Here you will create B-tape that has a charge opposite that of A-tape. You will come up with the procedure yourself. Keep in mind the following: Peeling A-tape off of the base layer creates charged A-tape of consistent sign You can neutralize tape by rubbing it with your fingers Charge is conserved. What is gained by one object is lost by the other. Oppositely charged objects will attract. The tape has a sticky side! Don't confuse electrical attraction with adhesion of the tape! 1. Describe your method for producing B-tape.
2. Make a sketch of the relative force (as measured by their deflections) between the oppositely charged pieces of tape as a function of their separation.
3. Are your observations from all the previous experiments consistent with Coulomb's Law and conservation of charge? How so?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 19:10

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

Answer

Engineering, 04.07.2019 19:10

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed

Answers: 3

Answer

Engineering, 06.07.2019 02:30

Plot schematically the tensile stress versus strain curves for a typical thermoplastic material at a temperature below its glass transition temperature (tg and at a temperature above its tg, respectively. do the same for a typical thermosetting material. list in a table any differences or similarities between the two materials at t> tg and t < tg, respectively, and relate them to the structures of the two types of polymers

Answers: 3

Answer

Engineering, 06.07.2019 03:10

List and describe the parts of boxford cnc milling machine with pictures?

Answers: 2

Answer

You know the right answer?

Create two tapes with opposite charge The previous exercises have shown you how to create a charged...

Questions