subject
Engineering, 14.07.2021 08:10 SmokeyRN

A rectangular channel 6.10 m wide carries 11.30 m3 /sec and discharges onto 6.10 m wide apron with no slope at a mean velocity of 6.10 m / sec. What is the height of the hydraulic jump? What energy is absorbed by the jump?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 19:10
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
question
Engineering, 06.07.2019 03:30
Give three differences between corrosion of metals and the corrosion of ceramics? what is static fatigue?
Answers: 1
You know the right answer?
A rectangular channel 6.10 m wide carries 11.30 m3 /sec and discharges onto 6.10 m wide apron with n...
Questions
question
Mathematics, 12.09.2021 02:30
question
Geography, 12.09.2021 02:30
question
Mathematics, 12.09.2021 02:30
question
Physics, 12.09.2021 02:30
Questions on the website: 13722362