Engineering, 16.07.2021 04:20 Talber1

4.65 A zener shunt regulator employs a 9.1-V zener diode for which VZ = 9.1 V at IZ = 9 mA, with rz = 40 and IZK= 0.5 mA. The available supply voltage of 15 V can varyas much as Â±10%. For this diode, what is the value of VZ0?For a nominal load resistance RL of 1 k and a nominal zenercurrent of 10 mA, what current must flow in the supply resistorR? For the nominal value of supply voltage, select a valuefor resistor R, specified to one significant digit, to provideat least that current. What nominal output voltage results?For a Â±10% change in the supply voltage, what variationin output voltage results? If the load current is reduced by50%, what increase in VO results? What is the smallest valueof load resistance that can be tolerated while maintainingregulation when the supply voltage is low? What is the lowestpossible output voltage that results? Calculate values for theline regulation and for the load regulation for this circuit usingthe numerical results obtained in this problem.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

Answer

Engineering, 04.07.2019 19:10

What are the major differences between injection molding and extrusion?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?

Answers: 2

Answer

You know the right answer?

4.65 A zener shunt regulator employs a 9.1-V zener diode for which VZ = 9.1 V at IZ = 9 mA, with rz...

Questions