Engineering, 23.07.2021 16:50 hdkdkdbx

For an applied transformer with a primary winding of 220, a secondary winding of 113 turns, a core of 45 cm2 cross-section and a rated supply voltage of 220 V, frequency f = 50 Hz, number system Core style K = 1,2. one. Calculated from the sensor in the core transformer.
NS. Calculate the rated capacity of the transformer application.
C. Calculating no-load voltage and current levels.
NS. If the power point is reduced by 7% from the voltage level; voltage scortation feature.
e. If use the core machine variable on random form; powerpress same as the host variable on; compare the capacity of the random transformer with the capacity of the transformer application.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 19:10

What are the major differences between injection molding and extrusion?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Analyze the factors that influence the choice between the following pairs of processes to make the products indicated: i) sand casting versus die casting of an electric-motor housing ii) thread rolling versus machining of a bolt for high-strength application. (co3/c5)

Answers: 3

Answer

Engineering, 06.07.2019 03:20

1kg of water contained in a piston-cylinder assembly undergoes two processes in series from an initial state where the pressure is 3.0 bar and the temperature is 150°c process 1-2: the water is compressed isothermally to a volume of 0.25 m^3 with 120 kj of work being done to the system. process 2-3: the water is heated at constant volume to a final pressure of 10 bar. a. find the change in internal energy for the system. b. calculate the amount of heat transferred, in kj. c. sketch both processes on a t-v diagram. (196.33 kj/kg, 76.33 kj)

Answers: 1

Answer

You know the right answer?

For an applied transformer with a primary winding of 220, a secondary winding of 113 turns, a core o...

Questions