subject
Engineering, 09.08.2021 20:40 khehnai

Tech A says that personal protective equipment (PPE) does not include clothing. Tech B says that the PPE used should be based on the task you are performing. Who is correct

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 06.07.2019 04:20
Explain the similarities and differences in the design guidelines for turning and for
Answers: 1
question
Engineering, 06.07.2019 05:10
Air flows over a flat plate at a velocity of 3 m/sec and ambient conditions are, the pressure is 761 mm of hg and tempera- ture is 15°c. the plate is maintained at 85°c. if the length of the plate is 100 cm along the flow of the air, find out the heat lost by 50 cm of the plate which is measured from the trailing edge. plate width is 50 cm.
Answers: 1
You know the right answer?
Tech A says that personal protective equipment (PPE) does not include clothing. Tech B says that the...
Questions
question
Mathematics, 25.02.2021 21:00
question
Mathematics, 25.02.2021 21:00
Questions on the website: 13722361