What's y' all's favorite color? AND BE SPECIFIC!!
I'll mark brainliest whoever answers 1st
<...
Engineering, 18.08.2021 22:50 xojade
What's y' all's favorite color? AND BE SPECIFIC!!
I'll mark brainliest whoever answers 1st
friend me btw ;)
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
You know the right answer?
Questions
Mathematics, 04.12.2020 18:40
Mathematics, 04.12.2020 18:40
History, 04.12.2020 18:40
Arts, 04.12.2020 18:40
Mathematics, 04.12.2020 18:40
Mathematics, 04.12.2020 18:40
Mathematics, 04.12.2020 18:40
English, 04.12.2020 18:40
Mathematics, 04.12.2020 18:40
Mathematics, 04.12.2020 18:40
Biology, 04.12.2020 18:40
Arts, 04.12.2020 18:40
