Engineering, 23.08.2021 20:20 emory238
Three identical fatigue specimens (denoted A, B, and C) are fabricated from a nonferrous alloy. Each is subjected to one of the maximum–minimum stress cycles listed in the following table; the frequency is the same for all three tests.
Specimen
A
B
C
σ
max
(MPa)
+450
+300
+500
σ
min
(MPa)
-150
-300
-200
(a) Rank the fatigue lifetimes of these three specimens from the longest to the shortest.
(b) Now, justify this ranking using a schematic S-N plot.
Answers: 1
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Three identical fatigue specimens (denoted A, B, and C) are fabricated from a nonferrous alloy. Each...
Mathematics, 18.05.2021 18:50
Mathematics, 18.05.2021 18:50
English, 18.05.2021 18:50
Mathematics, 18.05.2021 18:50
Mathematics, 18.05.2021 18:50