To achieve a bevel or chamfer you need to A. tilt a fence away from the operator

B. Remove the fence

C. Increase the depth of cut achieve the bevel or chamfer width in one pass

D. Tilt the fence towards the operator

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.