A tensile test was performed on a metal specimen with a circular cross section. The diameter was measured to be 0.550 inch. Two marks were made along the length of the specimen and were measured to be 2.030 inches apart. This distance is defined as the gage length, and all length measurements are made between the two marks. The specimen was loaded to failure. Fracture occurred at a load of 28,500 pounds. The specimen was then reassembled, and the diameter and gage length were measured to be 0.430 inch and 2.300 inches. Determine the: a. Ultimate tensile stress in ksi.
b. Elongation as a percentage.

answer: chicken nuggets.

explanation:

answer:

Thanks Again ☺♥

Can I be Brainliest!!

answer:

// here is code in C++.

#include <bits/stdc++.h>

using namespace std;

//main function

int main()

{

  // variable

 int n;

 cout<<"enter a number:";

 // read the input

 cin>>n;

 // find the square root of the absolute value

 float square_root=sqrt(abs(n));

 // print the square_root

 cout<<"square root of "<<n<<" is: "<<square_root<<endl;

  return 0;

}

Explanation:

Read a number from user and assign it to "n".Then find its absolute value with abs() function.Then calculate the square root of the absolute value with sqrt() function.Print the square root of the number.

Output:

enter a number:-17

square root of -17 is: 4.12311

                                                         This is easy

                                                     sinserly Natalie 7 grader (this is not that hard)