subject
Engineering, 04.09.2021 14:00 imstupid77

Cho ĐMđl có: Pđm=16 Kw, U=220 V, Iđm=70 A, n=1000 vòng/phút ,Xác định ω khi Mc=0,6 , Mđm và Rưi=0,52 Ω ; Rư=0,28 Ω

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
You know the right answer?
Cho ĐMđl có: Pđm=16 Kw, U=220 V, Iđm=70 A, n=1000 vòng/phút ,Xác định ω khi Mc=0,6 , Mđm và Rưi=0,52...
Questions
question
Arts, 28.07.2021 17:00
question
English, 28.07.2021 17:00
question
Arts, 28.07.2021 17:00
Questions on the website: 13722359