subject
Engineering, 08.09.2021 19:50 Kathryn014

A pump must be able to deliver 34 L/s of crude castor oil at 25°C ρ = 0.934 g/mL and μ = 0.078 Pa. s. It is known that, due to the type of pump chosen and the type of fluid, its efficiency will be around 76%. The capture point is located 8 m below the discharge point and both points are suffering only from atmospheric pressure. The distance between the two points (collection and discharge) is 25 m of pipe. The tubes used in this system are new commercial stainless steel drawn with 40 mm internal diameter, 1 globe valve (open) and 3 standard 45º elbows. Calculate the power that this bomb will have to have.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
You know the right answer?
A pump must be able to deliver 34 L/s of crude castor oil at 25°C ρ = 0.934 g/mL and μ = 0.078 Pa. s...
Questions
question
English, 06.07.2019 07:30
Questions on the website: 13722363