Engineering, 09.09.2021 19:00 shiann2002
determine the diode current at 20 degrees for a silicon diode with Is=50nA and an applied forward bias of 0.6V
Answers: 2
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
determine the diode current at 20 degrees for a silicon diode with Is=50nA and an applied forward bi...
Mathematics, 09.03.2021 22:40
Mathematics, 09.03.2021 22:40
Biology, 09.03.2021 22:40
Chemistry, 09.03.2021 22:40
Mathematics, 09.03.2021 22:40
Mathematics, 09.03.2021 22:40
World Languages, 09.03.2021 22:40
Mathematics, 09.03.2021 22:40