Engineering, 08.10.2021 21:10 aamu15

Circular bar 1 is attached to the wall by brackets 2 and 3. Bracket 3 is supported by a pin joint at F. Bracket 2 is attached to bracket 3 by bolt assemblies. Bar 1 is subjected to an external load of 5000 N (weight of the bar is negligible). Bracket 2 weighs 400 N and bracket 3 weighs 300 N. Bar 1 is made of a material which can withstand a maximum normal stress (sigma) =10 MPa and the bolted connections are made of material which can withstand a maximum shear stress ….

Circular bar 1 is attached to the wall by brackets 2 and 3. Bracket 3 is supported by a pin joint a

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 19:20

A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.

Answers: 1

Answer

Engineering, 06.07.2019 02:30

On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)

Answers: 2

Answer

You know the right answer?

Circular bar 1 is attached to the wall by brackets 2 and 3. Bracket 3 is supported by a pin joint at...

Questions