Engineering, 17.10.2021 07:10 Panthers23
Explain your own understanding about the relevant connections between the four subsystems of Earth through the use of a creative Concept Map Drawing.
Answers: 3
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12ยฐ, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in ยฐc, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
Explain your own understanding about the relevant connections between the four subsystems of Earth t...
English, 22.01.2021 01:50
Social Studies, 22.01.2021 01:50
Mathematics, 22.01.2021 01:50
Engineering, 22.01.2021 01:50
Mathematics, 22.01.2021 01:50
Mathematics, 22.01.2021 01:50
English, 22.01.2021 02:00
Mathematics, 22.01.2021 02:00
Biology, 22.01.2021 02:00