subject
Engineering, 23.10.2021 05:30 giraffegurl

A storm sewer is to drain an area of 40 acres. Design the diameter of this storm sewer if it is to carry away rain falling at a rate of 2 inches per hour during a period of 30 minutes, the time needed for the entire drainage area to become tributary to the storm sewer. The required minimum velocity of flow is the cleaning velocity of the sewer, which is 3 feet per s

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15Β°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
question
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10Β°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50Β°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
question
Engineering, 04.07.2019 19:10
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
You know the right answer?
A storm sewer is to drain an area of 40 acres. Design the diameter of this storm sewer if it is to c...
Questions
question
Mathematics, 07.12.2019 23:31
question
Mathematics, 07.12.2019 23:31
Questions on the website: 13722359