Design a single linear phase equiripple FIR filter with two stopbands, the first stopband is from 100 KHz to 200 KHz the second stopband is from 500 KHz to 700 KHz. Other frequencies outside theserangesare in the passband. The sample rateis2MHz. The filter should have more than 50 dB attenuation at the center of the stopbands. The passbands shall have no more than 0.1dB of ripple. Plot the magnitude of the frequency response in Matlab and include this in your answer as well as your working Matlab code.

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.