subject
Engineering, 23.11.2021 02:40 chris1848

Design a 50 A silicon pn diode capable of blocking voltages of 150 V. The junction area must be minimized and the diode temperature must not increase more than 40 °C during operation. •
Q: Specify the doping concentrations and thicknesses of the n- and p- base regions.
Q: Calculate the series resistance of the diode
Q: Estimate the heat dissipation requirement at the maximum operating current.
Q: Specify the junction shape and minimum junction area.
Q: Describe any special measures to suppress surface leakage currents.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
You know the right answer?
Design a 50 A silicon pn diode capable of blocking voltages of 150 V. The junction area must be mini...
Questions
Questions on the website: 13722363