Engineering, 25.11.2021 14:00 uwunuzzles
A municipal WW activated sludge facility has the following characteristics: Flow = 7.2 million liters per day Influent BOD5 = 200 mg/L Aeration basin volume = 3,000m^3 2 circular clarifiers (each with diameter = 20m and depth =4m) Return activated sludge flow rate = 3.5 million liters per day per clarifier MLVSS concentration = 3,500 mg/L Effluent VSS is negligable Sludge VSS concentration = 6,800 mg/L.
Required:
Determine the daily volume of sludge in liters per day (L/day) that must be removed to maintain a solids residence time of 5 days.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
You know the right answer?
A municipal WW activated sludge facility has the following characteristics: Flow = 7.2 million liter...
Questions
Mathematics, 29.10.2020 23:50
Mathematics, 29.10.2020 23:50
Mathematics, 29.10.2020 23:50
