Engineering, 01.12.2021 09:00 peytonwray04

This is a project to determine your water footprint. You are to estimate how much water you consume each year for taking showers and flushing toilets. Follow these steps to determine your shower and flushing water consumption. Obtain a container of a known volume, and then time how long it takes to fill the container when placed under shower head. Calculate the volumetric flow rate in gallons per minute. Then, measure the time that you spend on average when taking showers. Calculate the volume of the water consumed on daily basis. Multiply the daily value by 365 to get the yearly value. Look up the size of your toilet and estimate on average how many times per day you flush the toilet. Calculate the volume of water you consume on a daily basis. Multiply the daily volume by 365 to get the annual value. Submit your finding in a 2 min or less Flipgrid video. What is your daily Shower water usage? yearly? What is your daily toilet flushing usage? Yearly? According to the included video on daily water consumption, are you above or below the Canadian daily average? Discuss your annual consumption and ways to conserve.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

You know the right answer?

This is a project to determine your water footprint. You are to estimate how much water you consume...

Questions