Engineering, 01.12.2021 17:30 daydallas01
Consider a system for heating a liquid benzene/toluene solution to distil a pure benzene vapour. A
particular batch distillation unit is charged initially with 100 mol of a 60 percent mol benzene/40
percent mol toluene mixture. Let (mol) be the amount of liquid remaining in the still, and let (mol
B/mol) be the benzene mole fraction in the remaining liquid. Conservation of mass for benzene and
toluene can be applied to derive the following relation [Felder, 1986].
= 100 (
0.6
)
0.625 (
1 β
0.4
)
β1.625
Determine what mole fraction of benzene remains when = 70[mol]. Please present both
numerical and graphical solutions. Both results and show the percentage error of graphical solution
shall be presented by using disp or fprintf function
Answers: 1
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160Β°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:20
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
Consider a system for heating a liquid benzene/toluene solution to distil a pure benzene vapour. A...
Mathematics, 09.09.2021 22:50
Mathematics, 09.09.2021 22:50
History, 09.09.2021 22:50
Advanced Placement (AP), 09.09.2021 22:50
History, 09.09.2021 22:50
Mathematics, 09.09.2021 22:50
Mathematics, 09.09.2021 22:50
Biology, 09.09.2021 22:50
Mathematics, 09.09.2021 22:50
Mathematics, 09.09.2021 22:50