Engineering, 06.12.2021 18:20 risolatziyovudd

Consider a circular furnace that is 0.5m long and 1.0 m in diameter. The top surface (surface -1) of the furnace has an emissivity of 0.5 and a power input of 1x105 W by radiant heaters. The side walls (surface -3) consist of well-insulated refractory material, while the bottom consists of the steel plate (surface -2), which has an emissivity of 0.8. Assume diffuse, gray surface behavior for the heater and the plate and the bottom steel plate is at 350 K. Answer the following questions: (a) Compute the view factors F12 and F33
(b) Draw the radiation network for this problem
(c) By doing the energy balance for the 3 nodes, compute the radiocities (J1 and
J2) for top surface and the bottom steel plate.
(d) Compute the temperature of the top surface (T1).

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

Answer

You know the right answer?

Consider a circular furnace that is 0.5m long and 1.0 m in diameter. The top surface (surface -1) of...