Engineering, 15.01.2022 20:00 helpmepeeeeease
Castor oil is subjected to a pressure of 550 kPa at A and to a pressure of 200 kPa at B. If the pipe has a diameter of 30 mm, determine the shear stress acting on the wall of the pipe, and the maximum velocity of the oil. Also, what is the flow Q
Answers: 3
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
Castor oil is subjected to a pressure of 550 kPa at A and to a pressure of 200 kPa at B. If the pipe...
Mathematics, 16.12.2020 23:40
Social Studies, 16.12.2020 23:40
History, 16.12.2020 23:40
English, 16.12.2020 23:40
Chemistry, 16.12.2020 23:40
Advanced Placement (AP), 16.12.2020 23:40
Chemistry, 16.12.2020 23:40
Biology, 16.12.2020 23:40
Mathematics, 16.12.2020 23:40