Engineering, 14.04.2022 06:10 jmackenzie7

A single packed bed reactor is to be designed to process 100 mol/s of reactant A so as to produce product R. Feed gas at 2.49 MPa and 300 K, the allowable Tmax = 900 K, unless otherwise noted, Tmin= 300 K, the product stream is wanted at 300 K, and the thermodynamics and kinetics of the exothermic reaction are given to us in Fig. 19.11. Prepare a sketch of your recommended design and on it show a .The flow arrangement selected: plug, or mixed flow reactor b. Weight of catalyst needed
c. Heat duty ahead of the reactor, at the reactor itself, and after the reactor
d. Temperature of all flowing streams Work out a good design for 80% conversion of a feed consisting of 1 mole A and 7 moles of inert, with Cp = 40 J/mol. K

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?

Answers: 2

Answer

You know the right answer?

A single packed bed reactor is to be designed to process 100 mol/s of reactant A so as to produce pr...

Questions