Wendy wants to put a wallpaper border around her bedroom. The room has two walls that each measure 10 feet 5 inches and two walls that each measure 6 feet 1 inch. How many yards of wallpaper border must Wendy buy? 5.5 yards 11 yards 16 yards 33 yards

The correct answer is 11 yards of wallpaper border.

Step-by-step explanation: What Wendy needs to do is to calculate the perimeter of her bedroom. The perimeter of any given figure is simply a calculation of the entire measurement all around the given figure. In other words, the perimeter of Wendy's room denotes the addition of all the four side lengths of her bedroom.

The room has two sides both measuring 10 feet 5 inches. This gives a total of 20 feet 10 inches. It also has the other two sides both measuring 6 feet 1 inch and that too gives a total of 12 feet 2 inches. Adding them all together results in 32 feet 12 inches. Better still, the perimeter of the room is derived as;

Perimeter = 2 (L + W)

Perimeter = 2 (10'5" + 6'1")

Perimeter = 2(16'6")

Perimeter = 32'12"

Having in mind our conversion rate of 12 inches equals 1 foot, the results can be properly expressed as 32 feet plus 1 foot which gives us 33 feet.

If the perimeter of Wendy's room is now given as 33 feet, the conversion rate between feet and yards can now be applied. Having been given that

3 feet = 1 yard

Then 1 yard = 3 feet/3, that is

y = 3/3

Hence,

y = 33/3

y = 11

The results show that Wendy would needs to buy a total of 11 yards of wallpaper border.

answer: i would say b

step-by-step explanation:

with the way the question is worded, i believe b is the answer

the cost of the apple depends on the weight

d. millimeters per hour.

step-by-step explanation:

we are given that,

carlo used a rain gauge to measure the amount of water his lawn is receiving from the sprinklers.

since, according to the options, we see that,

water cannot be measured by 'miles per hour', 'meters per second' and 'grams per seconds'.

we get that, the water can be measured by 'millimeters per hour'.

hence, the appropriate rate for describing the amount of water is 'millimeters per hour'.