The screen of an eReader has a length of 8 inches and a width of 6 inches. Can the page content from an atlas that measures 19 inches by 12 inches be replicated on the eReader?If not, propose a solution to move the atlas content into the eReader format.

No, the page content of the atlas cannot be replicated on the eReader.

Please check explanations below for solution to question (b)

Step-by-step explanation: The dimensions of the eReader screen is given as 8 inches by 6 inches. In order to move a rectangular shape such as the atlas onto it would require the same measurements or, a measurement that has the same ratio as both the length and width of the screen, but a reduced size.

This brings us to similar shapes. When two shapes (rectangles in this case) are similar, it simply means there is a common ratio between the corresponding sides, that is the length and the width. If rectangle 1 has its side measuring 8 inches, then rectangle 2 would have the corresponding side having a common ratio with that of rectangle 1. This means the corresponding side in rectangle 2 can either be an enlargement (which would mean 8 times a scale of enlargement) or a reduction (which means 8 divided by a scale of reduction).

In the question given, the eReader screen has dimensions of 8 inches by 6 inches. The atlas has dimensions given as 19 inches by 12 inches. By observation we can see that the width of the atlas is times 2 of the screen. The length of the atlas however is not times 2 of the screen. That is;

Ratio = Rectangle 1 : Rectangle 2

Ratio of Width = 6 : 12

Ratio of Width = 1 : 2

Likewise

Ratio of Length = 8 : 19

Ratio of Length ≠ 1: 2

This proves that the atlas cannot be scaled down to fit properly into the screen. A solution to make this possible would be to resize the length of the atlas to become times 2 of the eReader screen. This would result in the atlas having new dimensions given as

Length = 16 inches

Width = 12 inches

This would ensure that both rectangular shapes are similar and the atlas can now be scaled down by a factor of 2 to fit in properly into the eReader screen.

answer: yard ramps with a level off platform are typically 36 feet long. truck, rather than at an angle, enabling access to those pallets at the very back of the truck. if you are using your yard ramp to convert a loading dock into a drive-in door, we even at 60 inches (5 feet) high and a 30 foot ramp, the slope of the ramp will be less

step-by-step explanation:

step-by-step explanation: