Mathematics, 28.07.2020 16:01 wendelkristen

Sarah serves at a restaurant and makes 20% of what she sells as tips. Her base salary is $10.20an hour. Each hour she sells an average of $60 of food and drinks. She also makes time and a half when she works over 8 hours during a single shift. Her work week contains three 10-hour shifts, one 5-hour shift, and one 11-hour shift. Using the same income deductions as stated in the previous question, what is Sarah’s annual gross income and annual net income.

Answers: 1

Show answers

Another question on Mathematics

Mathematics, 21.06.2019 17:30

Which equation represents a line that is parallel to the line whose equation is 3x-2y=7( show all work)

Answers: 3

Answer

Mathematics, 21.06.2019 19:00

The width of a rectangle is 20 units. can the perimeter p of the rectangle be 64 units when its length x is 11 units? no, because p = 2x + 2(20) no, because p ≠ 2x + 2(20) yes, because p ≠ 2x + 2(20) yes, because p = 2x + 2(20)

Answers: 1

Answer

Mathematics, 21.06.2019 19:10

Pranza plotted point a in the coordinate plane below.

Answers: 2

Answer

Mathematics, 21.06.2019 22:00

What is the solution to the equation e3x=12? round your answer to the nearest hundredth

Answers: 1

Answer

You know the right answer?

Sarah serves at a restaurant and makes 20% of what she sells as tips. Her base salary is $10.20an ho...

Questions

Business, 26.07.2019 17:10

Considerable research has documented that in many product categories, consumers are unable to distinguish among brands when given blind tests (i. e.,...

Business, 26.07.2019 17:20

Motel corporation is analyzing a capital expenditure that will involve a cash outlay of $208,240. estimated cash flows are expected to be $40,000 annu...

Engineering, 26.07.2019 17:20

Determine the power required for a 2500-kg car to climb a 200-m long uphill road with a slope of 30° in 8s, if the car a)-travels at constant velocity...

Engineering, 26.07.2019 17:20

Air is at 100 kpa and 150°c, and undergoes a constant pressure process. the final temperature of the air is 1000°c. a) compute the specific volume rat...

Engineering, 26.07.2019 17:20

What is the max speed that may be achieved over a distance of 60 m by a car starting from rest, if the coefficient of static friction is 0.70 between...

Engineering, 26.07.2019 17:20

Acylindrical tank filled with a fluid has a diameter of one meter and a length of 1.5 meters. t weighs 6000 n, where the gravitational acceleration is...

Engineering, 26.07.2019 17:20

Arigid tank contains water vapor at 300° c and an unknown pressure. the vapor starts condensing. the cooling continues until all vapors have path and...

Engineering, 26.07.2019 17:20

Which of the following characterizes a un-cold-worked steel in comparison with a cold-worked steel? i. higher yield strength ii. better surface smoot...

Engineering, 26.07.2019 17:20

If the turbulent velocity profile in a pipe 0.6 m in diameter may be approximated by -3.56y1/7 where v is in m/s and y is in m, and the shearing stres...

Engineering, 26.07.2019 17:20

Afixture will be designed to hold a part in a vise that will be produced in mass quantities. the rner closest to the mill oper a suitable fixture. the...

Engineering, 26.07.2019 17:20

The principle for strengthening metals/alloys is creating barriers to dislocation motion in their microstructures. then, what are the barriers to disl...

Engineering, 26.07.2019 17:20

What does the charpy test determine? (a) yield strength (b) fracture strength (c) young's modulus toughness e) ductility...

Engineering, 26.07.2019 17:20

Which of the following is the primary factor in determining if a sheet metal can be bent and formed into another shape without experiencing fracture a...

Engineering, 26.07.2019 17:20

Steam expands in a turbine from 6 mpa, 500°c and 80 m/s to 0.2 mpa, 150°c and 140 m/s at a rate of 1.2 kg/s. heat is lost from the turbine at a rate o...

Engineering, 26.07.2019 17:20

What are the four types of defects in crystalline metal materials?...

Engineering, 26.07.2019 17:20

Find the contact ratio for a pair of spur gears with a center distance of 4.125 in. if the gears have 19 and 80 teeth respectively and a normal pressu...

Engineering, 26.07.2019 17:20

Acompound tube is made by shrinking one steel tube onto another. the dimensions of the assembly are 200 mm internal diameter, 325 mm at the common int...

Engineering, 26.07.2019 17:20

Crude oil at 20°c fills the space between two concentric cylinders 250 mm high and with diameters of 150 mm and 156 mm. what torque is required to rot...

Engineering, 26.07.2019 17:20

For each quantity listed below, indicate it units using m (kg), l (m), t (s) and t (k) as basic dimensions. (a) power (b) pressure (c) modulus of elas...

Engineering, 26.07.2019 17:20

An fcc iron-carbon alloy initially containing 0.55 wt% c is exposed to an oxygen-rich and virtually carbon-free atmosphere at 1325 k (1052 c). under t...

More questions: Mathematics Another questions