The density of a certain material is such that it weighs 6 pounds per pint of volume. Express this density in grams per liter. Round your answer to the nearest whole
number.
*Note: you must use these exact conversion factors to get this question right.
Weight / mass
Volume
1 pound (lb) = 16 ounces (oz)
1 cup (cup) = 8 fluid ounces (fl oz)
i ton (ton) = 2000 pounds (lb)
1 pint (pt) = 2 cups (cups)
1 gram (g) = 1000 milligrams (mg)
i quart (at) = 2 pints (pt)
1 kilogram (kg) = 1000 grams (8)
1 gallon (gal) = 4 quarts (qt)
1 ounce (oz) = 28.35 grams (8)
1 cubic foot (ft") = 7.481 gallons (gal)
1 pound (1b) = 0.454 kilograms (kg) 1 liter (L) = 1000 milliliters (mL)
1 cubic meter (m) = 1000 liters (L)
1 gallon (gal) = 3.785 liters (L)
i fluid ounce (fl oz) = 29.574 milliliters (mL)

The expression of density of the material with a density of 6 pound per pint in grams per liter (g/L) is 5756.75 g/L

Step-by-step explanation:

The density of the material is 6 pounds per pint of volume

The given conversion factors are;

1 pint (pt) = 2 cups (cups)

1 cup (cup) = 8 fluid ounces (fl oz)

Therefore;

2 cups (cups) = 2 × 8 fluid ounces = 16 fl oz

Also given;

1 fluid ounce = 29.574 mililiters (mL)

16 fl oz = 16 × 29.574 mL = 473.184 mL

1 liter (L) = 1000 mililiters (mL)

∴ 1 mL = 1/1000 L = 0.001 L

473.184 mL = 473.184 ×  0.001 L = 0.473184 L

1 pound (lb) = 0.454 kilograms (kg)

6 lb = 6 × 0.454 kg = 2.724 kg

1 kg = 1000 grams (g)

2.724 kg = 2.724 ×  1000 grams (g) = 2724 g

Therefore, with 6 lb = 2724 g and 1 pt = 0.473184 L, the density, d, of the material in grams per liter that has a density of 6 pounds per pint is given as follows;  

d = 2724 g/(0.473184 L)= 5756.75 g/L

The expression of density of the material with a density of 6 pound per pint in grams per liter (g/L) = 5756.75 g/L = 5756.75 g/L.

28

step-by-step explanation:

because that's the answer

when rotating a figure 180 degrees, imagine that you are able to take the figure and turn it clockwise or counterclockwise around a center point. to rotate a figure 180 degrees, you will need to apply the rule (x, y) → (-x, -y). start by using a coordinate grid with coordinates for each vertex of the figure. the center point of the coordinate grid is located at (0, 0), which is what you will rotate the figure around. write down the original coordinates of the shape you are going to rotate. then, apply the rule. for example, coordinate (1, 2) becomes (-1, -2). another example would be, coordinate (-4, -2) becoming (4, 2). after you change each original coordinate to the rotated coordinate, you will draw your new figure.

step-by-step explanation: