subject
Mathematics, 02.09.2020 19:01 Lesquirrel

22
O Rational
0 Irrational
Is it rational or irrational

ansver
Answers: 3
Show answers

Another question on Mathematics

question
Mathematics, 21.06.2019 16:00
What is the length of the unknown leg in the right triangle ?
Answers: 2
Answer
question
Mathematics, 21.06.2019 18:30
1.two more than the quotient of a number and 6 is equal to 7 use the c for the unknown number translate the sentence into an equation
Answers: 1
Answer
question
Mathematics, 21.06.2019 18:50
Question b of 10which of the following describe an angle with a vertex at a? check all that applyo a. labcов. савd dooo c_baco d. zacb
Answers: 1
Answer
question
Mathematics, 22.06.2019 03:00
Which of the following statements must be true about this diagram? check all that apply. x°, y°, z°, & w°
Answers: 3
Answer
You know the right answer?
22
O Rational
0 Irrational
Is it rational or irrational...
Questions
question
Engineering, 26.07.2019 17:20
Determine the power required for a 2500-kg car to climb a 200-m long uphill road with a slope of 30° in 8s, if the car a)-travels at constant velocity...
question
Engineering, 26.07.2019 17:20
Air is at 100 kpa and 150°c, and undergoes a constant pressure process. the final temperature of the air is 1000°c. a) compute the specific volume rat...
question
Engineering, 26.07.2019 17:20
What is the max speed that may be achieved over a distance of 60 m by a car starting from rest, if the coefficient of static friction is 0.70 between...
question
Engineering, 26.07.2019 17:20
Acylindrical tank filled with a fluid has a diameter of one meter and a length of 1.5 meters. t weighs 6000 n, where the gravitational acceleration is...
question
Engineering, 26.07.2019 17:20
Arigid tank contains water vapor at 300° c and an unknown pressure. the vapor starts condensing. the cooling continues until all vapors have path and...
question
Engineering, 26.07.2019 17:20
Which of the following characterizes a un-cold-worked steel in comparison with a cold-worked steel? i. higher yield strength ii. better surface smoot...
question
Engineering, 26.07.2019 17:20
If the turbulent velocity profile in a pipe 0.6 m in diameter may be approximated by -3.56y1/7 where v is in m/s and y is in m, and the shearing stres...
question
Engineering, 26.07.2019 17:20
Afixture will be designed to hold a part in a vise that will be produced in mass quantities. the rner closest to the mill oper a suitable fixture. the...
question
Engineering, 26.07.2019 17:20
The principle for strengthening metals/alloys is creating barriers to dislocation motion in their microstructures. then, what are the barriers to disl...
question
Engineering, 26.07.2019 17:20
What does the charpy test determine? (a) yield strength (b) fracture strength (c) young's modulus toughness e) ductility...
question
Engineering, 26.07.2019 17:20
Which of the following is the primary factor in determining if a sheet metal can be bent and formed into another shape without experiencing fracture a...
question
Engineering, 26.07.2019 17:20
Steam expands in a turbine from 6 mpa, 500°c and 80 m/s to 0.2 mpa, 150°c and 140 m/s at a rate of 1.2 kg/s. heat is lost from the turbine at a rate o...
question
Engineering, 26.07.2019 17:20
What are the four types of defects in crystalline metal materials?...
question
Engineering, 26.07.2019 17:20
Find the contact ratio for a pair of spur gears with a center distance of 4.125 in. if the gears have 19 and 80 teeth respectively and a normal pressu...
question
Engineering, 26.07.2019 17:20
Acompound tube is made by shrinking one steel tube onto another. the dimensions of the assembly are 200 mm internal diameter, 325 mm at the common int...
question
Engineering, 26.07.2019 17:20
Crude oil at 20°c fills the space between two concentric cylinders 250 mm high and with diameters of 150 mm and 156 mm. what torque is required to rot...
question
Engineering, 26.07.2019 17:20
For each quantity listed below, indicate it units using m (kg), l (m), t (s) and t (k) as basic dimensions. (a) power (b) pressure (c) modulus of elas...
question
Engineering, 26.07.2019 17:20
An fcc iron-carbon alloy initially containing 0.55 wt% c is exposed to an oxygen-rich and virtually carbon-free atmosphere at 1325 k (1052 c). under t...
question
Engineering, 26.07.2019 17:20
What is the ratio between the viscosities of air and water at 10°c? what is the ratio between their kinematic viscosities at this temperature?...
question
Engineering, 26.07.2019 17:20
Interstage cooling is used to reduce the compression work required in a multistage compressor of a helium cooled nuclear reactor. in one such cooler,...
More questions: Mathematics Another questions
Questions on the website: 13722363
See results (0)