SOLVE A AND B.

machine parts are manufactured with a given tolerance, the permissible limit of variation.

a. Write an absolute value inequality representing the diameter of an engine cylinder that is to be 5 cm wide with a tolerance of +/- 0.005 cm.

b. Then solve the inequality to state the range of acceptable diameters.

d? maybe

step-by-step explanation:

d. millimeters per hour.

step-by-step explanation:

we are given that,

carlo used a rain gauge to measure the amount of water his lawn is receiving from the sprinklers.

since, according to the options, we see that,

water cannot be measured by 'miles per hour', 'meters per second' and 'grams per seconds'.

we get that, the water can be measured by 'millimeters per hour'.

hence, the appropriate rate for describing the amount of water is 'millimeters per hour'.

what is the graph

step-by-step explanation:

p ÷ r = tan(x)

step-by-step explanation:

given that there is a figure below shows a right triangle: a right triangle is shown with hypotenuse equal to q units and the length of the legs equal to p units and r units.

graph is missing so i will create the graph as per given information.

the angle between the legs having lengths p units and q units is y degrees. the angle between the legs having lengths r units and q units is x degrees.

now we need to find about what is p ÷ r equal to.

so we can use trigonometric ratio tan(x)=[altitude]/[base] to find the value of p ÷ r, because p is the altitude and r is the base.

p ÷ r=tan(x)

hence final answer is p ÷ r=tan(x).