A storage rack has two wires that help support the sides of the rack. Each wire connects the top of one side to the base of the rack. The sides form right angles
with the base of the rack. The rack and its interior dimensions are shown in this
diagram.
Wires
6 feet
6 feet
12 feet
Base
What is the length of the wire? Round to the nearest tenth.

Acircle has a radius of 5/6 units and is centered at (3.6, 7.8) write the equation of this circle

Atriangle has verticals at b(-3,0), c(2,-1), d(-1,2). which transformation would produce an image with verticals b”(-2,1), c”(3,2), d”(0,-1)?

Submarines control how much they float or sink in the ocean by changing the volume of air and water contained in large ballast tanks. when the tanks are completely full of water, the submarine increases its overall mass and sinks down to the bottom. when the tanks are completely full of air, the submarine reduces its overall mass and floats to the surface. depending on the density of the seawater surrounding the submarine, it will pump seawater in or out of the tanks in order to achieve the same overall density as the sea water and float neutrally in the water. the volume of the submarine never changes. when the tanks are completely full of water, a submarine with a volume of 7.8\times10^3\text{ m}^37.8×10 3 m 3 7, point, 8, times, 10, start superscript, 3, end superscript, space, m, start superscript, 3, end superscript has a total mass of 8\times10^6\text{ kg}8×10 6 kg8, times, 10, start superscript, 6, end superscript, space, k, g. the density of the seawater is 10^3\text{ kg/m}^310 3 kg/m 3 10, start superscript, 3, end superscript, space, k, g, slash, m, start superscript, 3, end superscript. to make that submarine float neutrally, and neither float nor sink in the ocean, what volume of water does that submarine need to subtract from its tanks?