There is a manhole cover with a radius of 1 foot. What is the manhole cover's diameter?

Step-by-step explanation:

This seems like you just want to figure out the circumference of the manhole cover. The formula for the circumference of a circle is pi (3.14) multiplied by the diameter (d) of the circle so, circumference=πd. (π is the symbol for pi and approx. equals 3.14)

Circumference = πd

= 3.14(d)

= 3.14(3)

= 9.42 ft.

The length of the brass grip-strip will be 9.42 ft.

If the problem was stated in terms of the radius of the manhole cover then the formula would be circumference = 2πr which is the radius multiplied by 2 then multiplied by pi.

The radius of a circle is the distance from the center to the edge and the diameter is the distance from one edge of the circle to the other passing through the center of the circle.

Well, if the grip strip were of no width and could be straightened out to a line (which a piece of rubber cut in a circle couldn't be), then the length of the grip would correspond to the circumference of the manhole cover.

Circumference = 2*PI*radius = PI*diameter so your answer is 3*PI feet long.

11 feet 6 inches and 8 feet 6 inches

you might have to contact customer support. if you have it on your iphone you just got into your settings> subscriptions> cancel

step-by-step explanation: