Jessie is building a cabinet door, which is pictured below. The center of the cabinet door is 12 inches by 16 inches, and the border of the cabinet door has a width of x inches. The entire cabinet door has an area of exactly 396 square inches. Clockwise from the top, the picture reads, x, 12 inches, 16 inches, x, Figure not drawn to scale.

Write an equation in standard form that can be used to find x , the width of the border.

Measuring to fit a cabinet opening includes a few extra steps to get the doors made in the right sizes for your remodel or renovation:  

Measure the inside edges: When measuring the width, measure from left to right, starting with the inside edge of the left stile (vertical part of the face frame) to the inside edge of the right stile. When measuring height, measure from the inside edge of the bottom rail (horizontal part of the face frame) to the inside edge of the top rail. We build to 1/16 inch increments, so be precise.

Add space for door overlay: Cabinet doors for framed cabinets must be larger than the cabinet opening to look right and close properly. We refer to this as an "overlay". The industry standard for most cabinet doors is a 1/2 inch overlay around the cabinet door. To create a 1/2 inch door overlay on all four sides, add 1 inch to your total height, and 1 inch to your total width

perimeter of the first rectangular board is 9 feet.

step-by-step explanation:

let p = perimeter of first board.

l = length of first board

w = width of first board

length of first board = 2 * width of first board - 3

l = 2w - 3

perimeter of first board = 2l + 2w

since l = 2w-3, then

p = 2*(2w-3) + 2w which equals 4w-6 + 2w which equals 6w-6

length and width of the second board are reciprocals of corresponding length and width of the first board.

length of second board = 1/(2w-3)

width of second board = 1/w

perimeter of second board is 1/5th perimeter of the first board.

perimeter of second board = p/5

perimeter of the second board = (2/(2w-3) + 2/w)

since the perimeter of the first board is 5 times the perimeter of the second board, this means that:

6w-6 = 5*(2/(2w-3) + 2/w)

which is the same as:

6w-6 = (10/(2w-3) + 10/w)

if we multiply both sides of this equation by (2w-3), we get:

(6w-6)*(2w-3) = 10 + 10*(2w-3)/w

if we multiply both sides of this equation by w, we get:

(6w-6)*(2w-3)*w = 10*w + 10*(2w-3)

we can simplify this to become:

(6w-6)*(2w-3)*w = 10w + 20w - 30

which becomes:

(6w-6)*(2w-3)*w = 30w-30

if we divide both sides of this equation by (6w-6), we get:

(2w-3)*w = (30w-30)/(6w-6)

which becomes:

(2w-3)*w = 5

this can be simplified to:

2w^2 - 3w = 5

subtract 5 from both sides of this equation to get:

2w^2 - 3w - 5 = 0

which can be factored into:

(2w-5)*(w+1) = 0

which makes:

w = 5/2

or

w = -1.

w can't be negative so the only possible answer is w = 5/2.

if w = 5/2, then

p = 2w-3 = 5-3 = 2

we have:

p = 2

w = 5/2

p = 2l + 2w gets p = 4 + 5 = 9

the perimeter of the first board is 9 feet.

since the perimeter of the second board is 1/5 the perimeter of the first board, the perimeter of the second board is 9/5.

to see if that's correct, we substitute known values for l and w into the second board.

the length of the second board is 1/l.

this becomes 1/2.

the width of the second board is 1/w

this bgecomes 1/(5/2) = (2/5)

let l2 = length of second board.

let w2 = width of second board.

l2 = (1/2)

w2 = (2/5)

let p2= perimeter of second board.

then p2 = 9/5

since p2 = 2*l2 + 2*w2, we should get p2 = 9/5 using the dimensions of l2 and w2.

2 * l2 = 2 * (1/2) = 1

2 * w2 = 2 * (2/5) = 4/5

1 is the same as 5/5

5/5 + 4/5 = 9/5

p2 checks out good.

the dimensions as given are good.

answer to the problem is:

perimeter of the first rectangular board is 9 feet.

sorry i dont know my friend