Two mechanics worked on a car. The first mechanic worked for 20 hours, and the second mechanic worked for 15 hours. Together they charged a total of 3275. What was the rate charged per hour by each mechanic if the sum of the two rates was 180 per hour?

for the friend request.

when a figure, such as triangle (xyz) is reflected over the line y = x to create x'y'z' the x-coordinates and y-coordinates of the original image (pre-image) will be reversed for the image. (e.g., (x, y) > (y, x)) this means that the pre-image position of the x- and y-coordinates switch places which in turn provides a mirror like image of the original xyz.  

i notice that when i draw a line segment from x to x', that the points are parallel from each other -- they are exactly across from each other and do not intersect with any other points.  

yes, think i would see the same characteristic if you drew the line segment connecting y with the reflecting line and then y' with the reflecting line because of the essence of reflections. because it is a mirror image, each point was effected the same way which leads me to conclude that they same would apply to y and y'.

part a

answer: a reasonable domain is where n is a real number. so n can be between 0 and 10. both endpoints are included.

work shown:

n is the number of days after the experiment starts. the smallest n can be is n = 0 which means that 0 days have gone by, and we're at the start. to find out how large n should be, then replace f(n) with 16.13 and solve for n. use logarithms to isolate the exponent.

f(n) = 12*(1.03)^n

16.13 = 12*(1.03)^n

16.13/12 = (1.03)^n

1.34416666666667 = (1.03)^n

(1.03)^n = 1.34416666666667

log[ (1.03)^n ] = log[ 1.34416666666667 ]

n*log[ 1.03 ] = log[ 1.34416666666667 ]

n = log[ 1.34416666666667 ]/log[ 1.03 ]

n = 10.0062999823929

this rounds to n = 10 which is fairly close but not 100% perfect. so this is the largest n can be.

note: if you plug n = 10 into f(n), you'll get roughly 16.127 which rounds to 16.13 (this comes up again in part c)

=====================================

part b

answer: the y intercept is 12. it represents the starting height of the plant in cm.

work shown:

plug n = 0 into the f(n) function. simplify

f(n) = 12*(1.03)^n

f(0) = 12*(1.03)^0

f(0) = 12*(1)

f(0) = 12

on day n = 0, aka the starting point, the height f(n) is 12 cm

=====================================

part c

answer: the average rate of change is approximately 0.43061036458991 (round however you need to). this represents the average growth rate from day n = 3 to day n = 10. so the plant grew roughly 0.43 cm per day during this timespan, assuming you round to 2 decimal places.

work shown:

compute f(3)

f(n) = 12*(1.03)^n

f(3) = 12*(1.03)^3

f(3) = 13.112724 < we'll use this later

compute f(10)

f(n) = 12*(1.03)^n

f(10) = 12*(1.03)^10

f(10) = 16.1269965521294 < we'll use this later

now use the formula below with a = 3 and b = 10

aroc = average rate of change

aroc = [ f(b) - f(a) ]/[ b - a ]

aroc = [ f(10) - f(3) ]/[ 10 - 3 ]

aroc = (16.1269965521294 - 13.112724)/(10 - 3)

aroc = 3.0142725521294/7

aroc = 0.43061036458991

round this however you need to

note: the plant grew approximately 3.01 cm over 7 days, so roughly 0.43 cm per day is the average growth rate (if you were to round to 2 decimal places).

b. 1.25 hr

step-by-step explanation:

if you have a constant speed of 60 mph, then you have a ratio between 60 mi. to 1 hr. dividing both sides by 60 we get the ratio

1 mi. to

then mult. both sides by 75 we get the ratio

75 mi. to

simplifying we get

75 mi. to

or 1.25 hr.