When a ball is dropped it is easy to see that earth exerts a force on it. why cant you tell that the ball exerts a force on it. why can't you tell the ball exerts a force on earth

Estimate the change in the gibbs energy and molar gibbs energy of 1.0dm3 of octane when the pressure acting on it is increased from 1.0 atm to 100 atm. the mass density of octane is 0.703 g cm−3

At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.

A75-hp (shaft output) motor that has an efficiency of 91.0 percent is worn out and is to be replaced by a high-efficiency motor that has an efficiency of 95.4 percent. the motor operates 4368 hours a year at a load factor of 0.75. taking the cost of electricity to be $0.12/kwh, determine the amount of energy and money saved as a result of installing the high-efficiency motor instead of the standard motor. also, determine the simple payback period if the pu