Physics, 01.07.2019 21:00 maddiefoley17

Describing the motion of an object can be difficult to do and using graphs make motion easier to understand. motion is a change in position measured by distance and time. speed tells us the rate at which an object moves. speed graphs are distance-time graphs; sometimes people label them as position-time graphs as well. time is plotted on the x-axis and distance or position on the y-axis of a line graph. a distance-time graph tells us how far an object has moved with time. • the steeper the graph, the faster the motion. • a horizontal line means the object is not changing its position. it is not moving, and it is at rest. • a downward sloping line means the object is returning to the start. use the text and the graphs above to choose all of the correct answers concerning speed? in both graphs, speed will be measured in meters/second. in graph a, the object travelled a distance of 40 meters in 4 seconds the total distance travelled by the object in graph b is greater than the object in graph a. in graph b, the object is at rest for 5 seconds. the object in graph b was moving at a greater speed than the object in graph a

Describing the motion of an object can be difficult to do and using graphs make motion easier to un

Answers: 2

Show answers

Another question on Physics

Physics, 21.06.2019 17:00

Shelly experiences a backward jolt when the driver starts the school bus. which of the following explains this phenomenon? a. the inertia of shelly b. the inertia of the bus c. the normal force of the seats on shelly d. the net force acting on shelly in a backward direction e. a zero net force acting on shelly

Answers: 1

Answer

Physics, 21.06.2019 23:10

6–55 refrigerant-134a enters the condenser of a residential heat pump at 800 kpa and 358c at a rate of 0.018 kg/s and leaves at 800 kpa as a saturated liquid. if the compressor consumes 1.2 kw of power, determine (a) the cop of the heat pump and (b) the rate of heat absorption from the outside air.

Answers: 2

Answer

Physics, 22.06.2019 07:10

Search coils and credit cards. one practical way to measure magnetic field strength uses a small, closely wound coil called a search coil. the coil is initially held with its plane perpendicular to a magnetic field. the coil is then either quickly rotated a quarter-turn about a diameter or quickly pulled out of the field. (a) derive the equation relating the total charge q that flows through a search coil to the magnetic-field magnitude b. the search coil has n turns, each with area a, and the flux through the coil is decreased from its initial maximum value to zero in a time ∆t. the resistance of the coil is r, and the total charge is q = i∆t, where i is the average current induced by the change in flux. (b) in a credit card reader, the magnetic strip on the back of a credit card is rapidly “swiped” past a coil within the reader. explain, using the same ideas that underlie the operation of a search coil, how the reader can decode the information stored in the pattern of magnetization on the strip. (c) is it necessary that the credit card be “swiped” through the reader at exactly the right speed? why or why not?

Answers: 2

Answer

Physics, 22.06.2019 14:20

4r-134a enters the condenser of a residential heat pump at 800 kpa and 50°c at a rate of 0.022 kg/s and leaves at 750 kpa subcooled by 3°c. the refrigerant enters the compressor at 200 kpa superheated by 4°c determine (a) the isentropic efficiency of the compressor, (b) the rate of heat supplied to the heated room, and (c) the cop of the heat pump. also, determine (d) the cop and rate of heat supplied to the heated room if this heat pump operated on the ideal vapor-compression cycle between the pressure limits of 200 and 800 kpa. (0.757, 4.37 kw, 5.12, 6.18, 3.91 kw)

Answers: 3

Answer

You know the right answer?

Describing the motion of an object can be difficult to do and using graphs make motion easier to un...

Questions