Physics, 28.06.2019 13:30 sin16

3) a driver in a 1000-kg car traveling at 24 m/s slams on the brakes and skids to a stop. if the coefticient of friction between the tires and the level road is 0 80 how long will the skid marks be? a) 37 m b) 30 m c) 34 m d 46 m

Answers: 1

Show answers

Answers

Answer from: filthyfish

The length of skidding marks will be of 37 m. Hence, option (A) is correct.

Given data:

The mass of car is, $m = 1000\;\rm kg$ .

The initial speed of car is, u = 24 m/s.

The final speed of car is, v=0. (Car stops finally due to friction)

The coefficient of friction between the tires road is, $\mu = 0.80$ .

The linear force acting on the car is opposed by the frictional force. Therefore,

Linear force = frictional force

$F = -f\\ma= -\mu mg\\a= -\mu g\\a = -0.8 \times 9.8\\a =-7.84 \;\rm m/s^{2}$

Now, apply the third kinematic equation of motion as,

$v^{2}=u^{2}+2as\\0=24^{2}+2(-7.84)s\\s \approx 37 \;\rm m$

Thus, the length of skidding marks will be of 37 m. Hence, option (A) is correct.

Learn more about the frictional force here:

link

Answer from: emo239

A) 37 m

Explanation:

The car is moving of uniformly accelerated motion, so the distance it covers can be calculated by using the following SUVAT equation:

v^2 -u^2 = 2ad (1)

where

v = 0 m/s is the final velocity of the car

u = 24 m/s is the initial velocity

a is the acceleration

d is the length of the skid

We need to find the acceleration first. We know that the force responsible for the (de)celeration is the force of friction, so:

$F=ma=-\mu mg$

where

m = 1000 kg is the mass of the car

$\mu = 0.80$ is the coefficient of friction

a is the deceleration of the car

g = 9.8 m/s^2 is the acceleration due to gravity

The negative sign is due to the fact that the force of friction is against the motion of the car, so the sign of the acceleration will be negative because the car is slowing down. From this equation, we find:

$a=-\mu g$

And we can substitute it into eq.(1) to find d:

$v^2 -u^2 = 2(\-mu g) d\\d= \frac{v^2-u^2}{-2 \mu g}=\frac{0-(24 m/s)^2}{-2(0.80)(9.8 m/s^2)}=36.7 m \sim 37 m$

Answer from: Quest

Your answer is c. explanation: plasma is the fourth state of matter, derived from the gaseous state of matter. plasma can contain free electrons and/or ions. while plasma is never neutral, it can either be positively or negatively charged. gases, however, are electrically neutral.

Answer from: Quest

No bc a lot of things r still theories n unproven

Another question on Physics

Physics, 21.06.2019 18:50

How does the image distance (di) of a convex lens compare with the image distance of a concave lens? a. the image distance of the convex lens is positive, and that of the concave lens is negative. b. both are negative for a virtual image. c. both are positive for a virtual image d. the image distance of the convex lens is negative, and that of the concave lens is positive.

Answers: 1

Answer

Physics, 21.06.2019 22:30

The of a machine determines its "usefulness." a. input force b. output force c. mechanical advantage

Answers: 2

Answer

Physics, 22.06.2019 06:00

The frequency of vibrations of a vibrating violin string is given by f = 1 2l t ρ where l is the length of the string, t is its tension, and ρ is its linear density.† (a) find the rate of change of the frequency with respect to the following. (i) the length (when t and ρ are constant) (ii) the tension (when l and ρ are constant) (iii) the linear density (when l and t are constant) (b) the pitch of a note (how high or low the note sounds) is determined by the frequency f. (the higher the frequency, the higher the pitch.) use the signs of the derivatives in part (a) to determine what happens to the pitch of a note for the following. (i) when the effective length of a string is decreased by placing a finger on the string so a shorter portion of the string vibrates df dl 0 and l is ⇒ f is ⇒ (ii) when the tension is increased by turning a tuning peg df dt 0 and t is ⇒ f is ⇒ (iii) when the linear density is increased by switching to another string df dρ 0 and ρ is ⇒ f is ⇒

Answers: 3

Answer

Physics, 22.06.2019 15:10

Suppose that f : rn → rm and that a ∈ k, where k is a connected subset of rn . suppose further that for each x ∈ k there exists a δx > 0 such that f(x) = f(y) for all y ∈ bδx (x). prove that f is constant on k; that is, f(x) = f(a) for all x ∈ k

Answers: 1

Answer

You know the right answer?

3) a driver in a 1000-kg car traveling at 24 m/s slams on the brakes and skids to a stop. if the coe...

Questions

Physics, 09.07.2019 05:00

Why is knowing only a hurricanes speed not enough information to be able to warn people to evacuate...