Physics, 18.11.2019 15:31 Arealbot

What is the difference between an isotope and an ion? ! : )

Answers: 2

Show answers

Answers

An isotope has two or more copies of a component whereby the atoms have the corresponding amount of protons. While ion is a combination of atoms exhibiting electrical explosives such as the sodium and chlorine atoms in a seasoning extract.

Answer from: Quest

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

Answer from: Quest

answer: at 24 february, 2014 the population gets twice of its initial population.

explanation:

since we have given that

the population for alpha city, t years after january 1, 2004 is given as

$p(t)=0.3t^2+6t+80$

first we find out the initial population, i.e. t=0,

so, our quadratic equation becomes,

$p(0)=0+0+80=80$

according to question, we have said that if the population has twice its initial population, then it becomes

$p(t)=2\times 80=160$

so, time taken to reach this above mentioned population is given by

$160=0.3t^2+6t+80\\\\160-80=0.3t^2+6t\\\\80=0.3t^2+6t\\\\0.3t^2+6t-80=0\\\\\text{using quadratic formula ,we get }\\\\t_{1,\: 2}=\frac{-60\pm \sqrt{60^2-4\cdot \: 3\cdot \: 800}}{2\cdot \: 3}\\\\t=-29.14\ and\ t=9.149$

now, we know that time can't be negative so, we take t=9.149 years.

hence, at 24 february, 2014 the population gets twice of its initial population.

Another question on Physics

Physics, 21.06.2019 23:00

How are calculation for velocity and speed different

Answers: 1

Answer

Physics, 22.06.2019 03:30

Scout feels ill one day before school. her mother puts a thermometer in her mouth and the temperature begins to climb to 100°f. what is happening between the cooler thermometer and scout's body? a) scout's body is applying a force to the particles in the thermometer. b) kinetic energy is being transferred from her mouth to the thermometer. c) potential energy is being lost by the thermometer and gained by scout's body. d) the potential energy stored in foods is converted to mechanical energy to raise the mercury in the thermometer.

Answers: 1

Answer

Physics, 22.06.2019 13:00

Aplayground merry-go-round has a radius of 4.6 m and a moment of inertia of 200 kg-m2 and turns with negligible friction about a vertical axle through its center. a child applies a 26.0 n force tangentially to the edge of the merry-go-round for 15.0 seconds. if the merry-go-round is initially at rest, how much work did the child do on the merry-go-round?

Answers: 1

Answer

Physics, 22.06.2019 20:30

Suppose a force of 60 n is required to stretch and hold a spring 0.1 m from its equilibrium position. a. assuming the spring obeys hooke's law, find the spring constant k. b. how much work is required to compress the spring 0.5 m from its equilibrium position? c. how much work is required to stretch the spring 0.6 m from its equilibrium position? d. how much additional work is required to stretch the spring 0.1 m if it has already been stretched 0.1 m from its equilibrium? a. kequals 600

Answers: 2

Answer

You know the right answer?

What is the difference between an isotope and an ion? ! : )...

Questions