subject
Physics, 03.07.2019 03:10 warnene17

Awater distribution system is composed of three sections, by which the water flows at 10 1.325 kpa and 25%. in section i , the water flows through a mass flow rate of m1 20.0 kg/s. in section 2 the flow occurs in a cross-sectional area of 0.003m2. while in section 3 the fluid in question flows with a volumetric flow rate q3 0.06 m3 s. it is known that sections 1 and 2 are inlet nozzles discharging in section 3. it is also known that the entire process is carried out in a steady state. considering the above, determine the mass flow rate, in kg/s, and the flovw velocity, in m/s at the entrance of section 2, considering the fluid density 997 kg/m3

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 01:50
Arod of some material 0.20 m long elongates 0.20 mm on heating from 21 to 120°c. determine the value of the linear coefficient of thermal expansion [in (degrees c)^-1] for this material.
Answers: 2
question
Physics, 22.06.2019 06:20
Oxygen undergoes an isentropic expansion from 120 degree c and 280 kpa absolute to 140 kpa absolute. determine the final temperature of the oxygen and the amount of work per kg of o_2 produced in the process if it is adiabatic.
Answers: 1
question
Physics, 22.06.2019 12:30
When a vertical beam of light passes through a transparent medium, the rate at which its intensity i decreases is proportional to i(t), where t represents the thickness of the medium (in feet). in clear seawater, the intensity 3 feet below the surface is 25% of the initial intensity i0 of the incident beam. what is the intensity of the beam "10" feet below the surface? (give your answer in terms of i0. round any constants or coefficients to five decimal places.)
Answers: 2
question
Physics, 22.06.2019 15:20
Acarpenter builds an exterior house wall with a layer of wood 2.9 cm thick on the outside and a layer of styrofoam insulation 2.3 cm thick on the inside wall surface. the wood has k=0.080w/(m⋅k), and the styrofoam has k= 0.010 w/(m⋅k). the interior surface temperature is 19.0 ∘c , and the exterior surface temperature is -15.0 ∘c . a.)what is the temperature at the plane where the wood meets the styrofoam? celsius b.)what is the rate of heat flow per square meter through this wall? /m^2
Answers: 2
You know the right answer?
Awater distribution system is composed of three sections, by which the water flows at 10 1.325 kpa a...
Questions
Questions on the website: 13722360