1. you are in charge of monitoring the pressure of a compressed air tank in a processing plant. after repeating the pressure measurement a large number of times, you found that the pressure values have gaussian distribution with a mean value of 69 psi and a standard deviation of 10 psi. if it is important that the pressure stays below 82 psi, what is the probability (in percent) that the pressure will exceed this value?
Answers: 3
Another question on Physics
Physics, 22.06.2019 07:30
Some material consisting of a collection of microscopic objects is kept at a high temperature. a photon detector capable of detecting photon energies from infrared through ultraviolet observes photons emitted with energies of 0.3 ev, 0.5 ev, 0.8 ev, 2.0ev, 2.5ev, and 2.8ev. these are the only photon energies observed. (a) draw and label a possible energy-level diagram for one of the microscopic objects, which has four bound states. on the diagram, indicate the transitions corresponding to the emitted photons. explain briefly. (b) would a spring–mass model be a good model for these microscopic objects? why or why not? (c) the material is now cooled down to a very low temperature, and the photon detector stops detecting photon emissions. next, a beam of light with a continuous range of energies from infrared through ultraviolet shines on the material, and the photon detector observes the beam of light after it passes through the material. what photon energies in this beam of light are observed to be significantly reduced in intensity (“dark absorption lines”)? explain briefly.
Answers: 3
Physics, 23.06.2019 01:30
"if the pressure acting on an ideal gas at constant temperature is tripled, its volume isa) reduced to one-third.b) increased by a factor of three.c) increased by a factor of two.d) reduced to one-half"
Answers: 2
Physics, 23.06.2019 02:50
Orque can be calculated by multiplying the force (n) applied at 90∘ to the lever arm at a distance (m) from the pivot point (point of rotation), the compound si unit for the torque is n⋅m. if the force (at 90∘ to the lever arm) applied is 15 n and it is applied at 2.0 m from the pivot point (point of rotation), what is the torque on the lever?
Answers: 2
You know the right answer?
1. you are in charge of monitoring the pressure of a compressed air tank in a processing plant. afte...
Questions
Chemistry, 22.10.2020 01:01
Mathematics, 22.10.2020 01:01
Mathematics, 22.10.2020 01:01
English, 22.10.2020 01:01
Physics, 22.10.2020 01:01
English, 22.10.2020 01:01
Physics, 22.10.2020 01:01
Mathematics, 22.10.2020 01:01
