Atruck is traveling at 30 m/s on a slippery road. the driver slams on the brakes and the truck starts to skid. if the coefficient of kinetic friction between the tires and the road is 0.20, how far will the truck skid before stopping?

I'm kinda lost ! 1. when marilyn takes her pet dog for a walk, the dog walks at a veryconsistent pace of 0.55 m/s. draw a position-time graph to representmarilyn's dog walking the 19.8 m distance from the front of her house tothe nearest fire hydrant.2. both car a and car bleave school when a stopwatch reads zero. car atravels at a constant 75 km/h, and car b travels at a constant 85 km/h.a) draw a position-time graph showing the motion of both cars. howfar are the two cars from school when the stopwatch reads 2 hrs? calculate the distances and show them on your graph.b) both cars passed a gas station 120 km from the school. when dideach car pass the gas station? calculate the times and show themon your graph.3. the figure below shows the position-time graph showing a shopper'smovement up and down the aisle at a store.a) write a story describing the shopper's movements at the store.b) when does the shopper have a position of 6 m? c) how much time passes between when the shopper enters the aisleand when he gets to a position of 12 m? what is the shopper's averagevelocity between 37 s and 46 s?

The frequency of vibrations of a vibrating violin string is given by f = 1 2l t ρ where l is the length of the string, t is its tension, and ρ is its linear density.† (a) find the rate of change of the frequency with respect to the following. (i) the length (when t and ρ are constant) (ii) the tension (when l and ρ are constant) (iii) the linear density (when l and t are constant) (b) the pitch of a note (how high or low the note sounds) is determined by the frequency f. (the higher the frequency, the higher the pitch.) use the signs of the derivatives in part (a) to determine what happens to the pitch of a note for the following. (i) when the effective length of a string is decreased by placing a finger on the string so a shorter portion of the string vibrates df dl 0 and l is ⇒ f is ⇒ (ii) when the tension is increased by turning a tuning peg df dt 0 and t is ⇒ f is ⇒ (iii) when the linear density is increased by switching to another string df dρ 0 and ρ is ⇒ f is ⇒

Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?