Density of wooden object 1. weigh the wooden object and record its mass mwood in table 11.2. then place the balance on the ring stand. 2. attach a metal sinker to the bottom of the wooden object (the sinker should weigh enough to submerge the object completely) and hang the combination from the balance hook. think about why you do not need to weigh the sinker! 3. place enough water in the large beaker so that the wooden object and sinker can be submerged completely without the sinker touching bottom. place the beaker on the lab jack. 4. raise the lab jack to submerge only the sinker, then measure and record the mass m, of the object/sinker combination. 5. raise the lab jack to submerge the entire object/sinker combination, then measure and record their combined mass mso- 6. use equation 11.2 to calculate and record the buoyant force fo (in newtons). 7. use equation 11.6 to calculate the density pwood of the wooden object. use the accepted value of the wood density (consult your textbook for this value) to calculate the percent error. b. density of wooden object table 11.2 mwood =0.012 kg mo = 0.072 kg mso = 0.055 kg fo=10.284 n prood = 4222.6 kg/m^3 ipted pwood = 420 kg/m^3

Red’s momentum vector before the collision is green’s momentum vector after the collision. question 1 options: shorter than longer than equal to question 2 (1 point) saved since green bounces off red, this must be an collision. question 2 options: explosion inelastic elastic question 3 (1 point) saved red transfers of its momentum to green during the collision. question 3 options: little all most none question 4 (4 points) why does red transfer all its momentum to green? back up your answer with information from the simulation. write at least 2 sentences. question 4 options: skip toolbars for . more insert actions. more text actions. more paragraph style actions. question 5 (1 point) now make red much heavier than green. answer the questions below to describe how both red and green behave after the collision. you might want to play the sim multiple times. click on restart or return balls to start over. to see numbers, check the show values box (inside the green box). red during the collision because it transferred some momentum to green. question 5 options: sped up kept the same velocity slowed down question 6 (1 point) green sped up during the collision as it question 6 options: lost momentum to red maintained a constant momentum. gained momentum from red question 7 (1 point) after the collision . . question 7 options: red bounced off green and went to the left. green moved to the right. both green and red stopped as they have lost all momentum. red stopped and green moved to the right. both green and red moved to the right. question 8 (4 points) only some of red’s momentum was transferred to green. why did this occur? back up your answer with information from the simulation. write at least 2 sentences. question 8 options: skip toolbars for . more insert actions. more text actions. more paragraph style actions. question 9 (1 point) now make red much lighter than green. answer the questions below to describe how both red and green behave after the collision. you might want to play the sim multiple times. click on restart or return balls to start over. to see numbers, check the show values box (inside the green box). which is true about the collision? question 9 options: green slowed down after the collision therefore it must have lost momentum. green sped up after the collision therefore it must have lost momentum. green sped up after the collision therefore it must have gained momentum. green slowed down after the collision therefore it must have gained momentum. question 10 (1 point) since green gained momentum, red had to have momentum because you cannot create or destroy momentum. question 10 options: lost kept the same amount of gained question 11 (1 point) since green was so much and harder to move, it caused red to bounce back to the left giving red . question 11 options: lighter. . . . negative heavier . . . . negative lighter. . . . positive heavier . . . . positive question 12 (4 points) now, click on more data at the bottom of the sim. play with different numbers for the masses and starting velocities. you can even make the starting velocities negative! tell me one thing you discovered by adjusting the speeds and masses. write at least 2 sentences. be specific and use words like velocity, momentum, mass, increased, decreased, etc. question 12 options: skip toolbars for . more insert actions. more text actions. more paragraph style actions. part 2: inelastic collisions question 13 (1 point) click on the "less data" box at the bottom of the sim. in the green box, slide the elasticity meter all the way to inelastic so there is 0% elasticity: make the masses whatever size suits you. make sure that green starts out with a velocity of 0 m/s – if you didn’t change this in the last step, you don’t need to do anything. push play and observe! true or false: when red and green collide, they stick together. question 13 options: true false question 14 (1 point) the velocity of red & green after the collision is the velocity that red started off with. question 14 options: larger than smaller than equal to

What is the electric force acting between two charges of -0.0045 c and -0.0025 c that are 0.0060 m apart? use fe=kq1q2/r^2 and k = 9.00 x 10^9 n*m^2/c^2 a. 1.7 x 10^7 n b. -1.7 x 10^7 n c. -2.8 x 10^9 n d. 2.8 x 10^9 n

The experiment was repeated many years later but the gases were mixed in a different type of container. a white solid was obtained which was xenon fluoride. predict whether you think 1) krypton and 2) radon will react with fluorine. explain reasons for your predictions