If the gap between c and the rigid wall at d is initially 0.15 mm, determine the magnitudes of the support reactions at a and d when the force p = 200 kn is applied. the assembly is made of a36 steel.

Answertraveling around a circular trackexplanation"traveling around a circular track" is the best answer as you could be traveling around a circular track at a constant speed. your velocity would therefore have the same magnitude but will always be constantly direction. since acceleration is the rate of change of velocity, the rate of change will only involve the direction of velocity and not the magnitude.wrong choices: "an object at rest" does not accelerate at all"increasing speed while traveling around a curve" means that the acceleration will not be constant due to only change in direction; it will be constant due to both magnitude and direction"an object in free fall" does not necessarily change direction 

Ohm's law tells you that i = v/r where v is equivalent voltage and r is equivalent resistance of the circuit
since all circuits have the same voltage, your question is really asking which circuit has the lowest total resistance, since the lower the resistance, the higher the current
circuit a has a resistance of 5 ohms; circuit c is in series so has a resistance of 10 ohms; circuit b is in parallel and therefore has a resistance of 2.5 ohms (review your notes on adding resistances in parallel and series); therefore b has the highest current

The answer is: c. from underground