subject
Physics, 26.07.2019 04:30 kindaconfuseing

Consider an air solar collector that is 1 m wide and 5 m long and has a constant spacingof 3 cm between the glass cover and the collector plate. air enters the collector at 30°c ata rate of 0.15 m3/s through the 1-m-wide edge and flows along the 5-m-long passage way. if the average temperatures of the glass cover and the collector plate are 20°c and 60°c, respectively, determine (a) the net rate of heat transfer to the air in the collector and (b)the temperature rise of air as it flows through the collector.

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 23:00
How are calculation for velocity and speed different
Answers: 1
question
Physics, 22.06.2019 03:30
As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.
Answers: 3
question
Physics, 22.06.2019 11:00
Engineers find a new metal that is stronger than steel but much lighter. this material is also significantly cheaper than what is currently used for most aircraft, available in large quantities, and easy to manufacture. the engineers are excited because this new material will lower the costs of buying and operating airplanes for companies. what is probably the best step for the engineers to make next?
Answers: 2
question
Physics, 22.06.2019 16:00
The solid that is formed and usually sinks to the bottom of a solution is the
Answers: 2
You know the right answer?
Consider an air solar collector that is 1 m wide and 5 m long and has a constant spacingof 3 cm betw...
Questions
Questions on the website: 13722361